Diagnostic Display Of Optional Safety Technology Modules "M5 - Bosch rexroth ctrlX SAFETY SafeMotion Applications Manual

ctrlX SAFETY "SafeMotion"
284 / 302
Diagnostic display
PROFINET IO
Table 62: Diagnostic LED
LED: Color / flashing pat-
tern
1)
off
Flashing green
Permanently lit green
Flashing red
Permanently lit red
Flashing red-green
1) Flashing pattern: One square corresponds to a duration of 200 ms; the arrow marks the end of a
cycle
GN = LED permanently lit green
RD = LED permanently lit red
-- = LED is off
13.6.3

Diagnostic display of optional safety technology modules "M5"

FSoE
In case of the safety bus communication via FSoE, the LEDs PF40 / PF41
indicate the following:
Table 63: LED display for safety bus communication via FSoE
Significance
FSoE status Initializa-
tion/reset
Session /
Connection /
Parameter
Data
Identifying the safety technology
critical safety technology error
Bosch Rexroth AG
Description
Invalid IP address
No cyclic connection
Connection error-free
Connection interrupted (e.g., watchdog)
IP address already exists (Duplicate IP address check)
Device running up and self test
PF40
Red
Flashing red-green
Green
Flashing red-green
Red
PF41
off
see ⮫ FSoE status, detailed diag-
nostics
see ⮫ FSoE status, detailed diag-
nostics
R911404905, Edition 02