Table of Contents
Advertisement
ctrlX SAFETY "SafeMotion"
104 / 302
Transition functions
● The duration of the transition is monitored (cf. "P‑0‑3280.0.2" or
● The
● The transition function "Safe stop 2" is selected via the active "SafeMotion"
● The state of the transition function "Safe stop 2" is displayed via parameter
Parameters involved
The following parameters are used in conjunction with the transition function
"Safe stop 2 (SS2)":
● P‑0‑3238, SMO: Active velocity threshold
● P‑0‑3255, SMO: Velocity threshold for Safe standstill
● P‑0‑3261.0.1, SMO: State machine control word, functional
● P‑0‑3263.0.1, SMO: Configuration of stopping process
● P‑0‑3264, SMO: Safety function selection
● P‑0‑3264.0.1, SMO: Safety function status
● P‑0‑3280.0.1, SMO: Configuration of operation mode transitions
● P‑0‑3280.0.2, SMO: Max. Transition time normal oper. to safe standstill
● P‑0‑3280.0.3, SMO: Max. Transition time between safe operating states
Diagnostic messages involved
The following diagnostic messages can be generated in conjunction with the
safety function "Safe stop 2 (SS2)":
● C0214 SMO: Incorrect configuration
● F7050 Maximum transition time exceeded
● F7051 Safely-monitored deceleration exceeded
● F7052 Selected target velocity exceeded
● F8350 Maximum transition time exceeded
● F8351 Safely-monitored deceleration exceeded
With the transition function "Safe stop 2 (SS2)" activated, the display of the
drive controller panel does not show any specific message.
Transition function
Configuring the transition function
To
it
SMO: Configuration of operation mode transitions" during the commissioning
of safety technology.
Selecting the transition function
The
via
SMO: Safety function selection", when the following conditions have been ful-
filled:
Bosch Rexroth AG
"P‑0‑3280.0.3"). When the monitoring function is triggered, this causes
an error reaction which decelerates the drive system. The corresponding
error message is "F7050 Maximum transition time exceeded or "F8350
Maximum transition time exceeded".
deceleration
during
safety
function
"Safely-monitored
monitoring
function
which decelerates the drive system. The corresponding error mes-
sage is "F7051 Safely-monitored deceleration exceeded" or "F8351
Safely-monitored deceleration exceeded".
profile using the parameter "P-0-3264, SMO: Safety function selection".
"P-0-3264.0.1, SMO: Safety function status".
use
the
transition
has
to
be
configured
transition
function
the
active
"SafeMotion"
the
transition
deceleration
is
triggered,
this
causes
function
"Safe
via
the
"Safe
stop
2
(SS2)"
profile
using
is
monitored
via
(SMD)".
When
an
error
reaction
stop
2
(SS2)",
parameter
"P-0-3280.0.1,
can
be
activated
the
parameter
"P-0-3264,
R911404905, Edition 02
the
the
Advertisement
Table of Contents
