Hazards Due To Incorrect Use; Instructions With Regard To Specific Dangers; Protection Against Contact With Electrical Parts And Housings - Bosch rexroth ctrlX SAFETY SafeMotion Applications Manual

ctrlX SAFETY "SafeMotion"
14 / 302

Instructions with regard to specific dangers

● For their individual application, the machine manufacturer and the system
● Commissioning of the provided components is prohibited until is has been
● Operation is only allowed when complying with the national EMC regulations
● For information about EMC-compliant installation, refer to the section on
● The system or machine manufacturer is responsible for compliance with the
● The technical data, connection and installation conditions of the compo-
● Country-specific laws and regulations must be observed.
4.1.3

Hazards due to incorrect use

● High electrical voltage and high operating current! Danger to life or serious
● High electrical voltage due to incorrect connection! Danger to life or per-
● Dangerous movements! Danger to life, serious personal injury or property
● Health hazard for persons with heart pacemakers, metal implants and
● Risk of burns by hot housing surfaces!
● Risk of injury by improper handling! Personal injury by crushing, shearing,
● Risk of injury by improper handling of batteries!
● Risk of injury by improper handling of pressurized lines!
4.2 Instructions with regard to specific dangers
4.2.1

Protection against contact with electrical parts and housings

This section concerns components of the electric drive and control system with
voltages of more than 50 volts.
Contact with parts conducting voltages above 50 volts can cause personal
danger and electric shock. When operating components of the electric drive
and control system, it is unavoidable that some parts of these components
conduct dangerous voltage.
High electrical voltage! Danger to life, risk of injury by electric shock or serious
personal injury!
● Only qualified persons are allowed to operate, maintain and/or repair the
● Follow the general installation and safety regulations when working on
Bosch Rexroth AG
installer have to
– verify the applicability of the provided components and the specifications
made for their use in this application documentation,
– synchronize the applicability with the safety regulations and standards
applicable for their application and to execute the required measures,
modifications and additions.
established that the machine or the system in which the components are
installed corresponds to the country-specific provisions, safety regulations
and standards of the application.
for the relevant application.
EMC in the relevant application documentation.
limit values specified in the national regulations.
nents are contained in the relevant application documentations and must be
complied with.
personal injury due to electric shock!
sonal injury due to electric shock!
damage due to unintended motor movements!
hearing aids in proximity to electric drive systems!
cutting, hitting!
components of the electric drive and control system.
power installations.
R911404905, Edition 02