Important Directions On Use; Intended Use; Introduction; Areas Of Use And Application - Bosch rexroth ctrlX SAFETY SafeMotion Applications Manual

3

Important directions on use

3.1

Intended use

3.1.1

Introduction

The products of Rexroth are developed and manufactured to the state-of-the-
art. Prior to delivery, the products are checked for their fail-safe state.
Before using Rexroth products, make sure that all the prerequisites for an
intended use of the products are satisfied:
● Anyone that in any way, shape or form uses our products must have read
● Do not change the original state of the hardware products, i.e., do not make
● Damaged or defective products must not be installed or commissioned.
● It has to be ensured that the products are installed according to the provi-
3.1.2

Areas of use and application

Antriebsregelgeräte by Rexroth are designed to control electric motors and
monitor their operation. Controlling and monitoring the Antriebsregelgeräte
may require additional sensors and actuators.
The Antriebsregelgeräte may only be used with the accessories and attach-
ments specified in this documentation. Components that are not expressly
mentioned may neither be attached nor connected. The same applies to cables
and lines.
Operation is only allowed in the specified configurations and combinations of
the components using the software and firmware as specified in the relevant
functional descriptions.
Antriebsregelgeräte have to be programmed before commissioning to ensure
that the motor executes the functions specific to the application.
Antriebsregelgeräte of the ctrlX DRIVE series have been developed for use in
single-axis and multi-axis drive and control tasks.
Device types with different drive power and interfaces are available for using
the Antriebsregelgeräte in specific applications.
Typical applications include, for example:
● Handling and assembly systems
● Packaging and food machines
● Printing and paper converting machines
● Machine tools
R911404905, Edition 02
Personal injury and property damage due to incorrect
WARNING
use of the products!
The products have been designed for use in an industrial
environment and may only be used as intended. If the
products are not used as intended, this may lead to sit-
uations resulting in property damage and personal injury.
Damages resulting from unintended use
NOTICE
The user shall solely bear the risks for damages arising of
unintended use of the products; Rexroth as manufacturer
shall not assume any warranty, liability or compensation
for damages.
and understood the relevant safety instructions and the intended use.
any structural modifications. Software products must not be decompiled
and their source codes must not be modified.
sions specified in the documentation.
ctrlX SAFETY "SafeMotion"
Intended use
Bosch Rexroth AG
11 / 302