Table of Contents
Advertisement
FRONT AND REAR BRAKE
CAUTION:
Disc brake components rarely require dis-
assembly. DO NOT:
Disassemble components unless abso-
lutely necessary.
Use solvents on internal brake compo-
nent.
Use contaminated brake fluid for clean-
ing.
Allow brake fluid to come in contact with
the eyes otherwise eye injury may occur.
Allow brake fluid to contact painted sur-
faces or plastic parts otherwise damage
may occur.
Disconnect any hydraulic connection oth-
erwise the entire system must be disas-
sembled, drained, cleaned, and then
properly filled and bled after reassembly.
WARNING
Use only designated quality brake fluid:
Otherwise, the rubber seals may deterio-
rate, causing leakage and poor brake per-
formance.
Refill with the same type of brake fluid:
mixing fluids may result in a harmful
chemical reaction and lead to poor perfor-
mance.
Be careful that water does not enter the
master cylinder when refilling. Water will
significantly lower the boiling point of the
fluid and may result in vapor lock.
BRAKE PAD REPLACEMENT
NOTE:
It is not necessary to disassemble the brake
caliper and brake hose to replace the brake
pads.
Front brake
1.Loosen:
Pad pins 1
6 - 14
CHAS
Advertisement
Table of Contents
