REAR SHOCK ABSORBER AND SWINGARM
REMOVAL
Air filter case
WARNING
Securely support the motorcycle so there is
no danger of it falling over.
1.Place the motorcycle on a level place.
2.Remove:
Side covers
Seat
Fuel tank
Refer to "SEAT, FUEL TANK AND COV-
ERS" in CHAPTER 3.
3.Elevate the rear wheel by placing a suit-
able stand under the frame and engine.
4.Disconnect:
CDI unit 1
Bolts 2
5.Remove:
Rear frame 2 1
6.Disconnect:
Breather hose 1
Breather hose 2
Refer to "CRANKCASE BREATHER HOSE
INSPECTION" in CHAPTER 3.
7.Loosen:
Screw (carburetor joint clamp)
8.Remove:
Bolts
6 - 61
CHAS