Table of Contents
Advertisement
DRIVE CHAIN AND SPROCKETS
CAUTION:
Too little chain slack will overload the
engine and other vital parts; keep the slack
within the specified limits.
7.Tighten:
Axle nut
Bolt (drive sprocket)
Refer to "REAR WHEEL".
8.Install:
Cotter pin
NOTE:
Bend the ends of the cotter pin as illus-
trated.
Always use a new cotter pin.
9.Install:
Crankcase cover 2 (drive sprocket)
Shift pedal
Refer
ADJUSTMENT" in CHAPTER 4.
6 - 77
CHAS
Axle nut:
105 Nm (10.5 m • kg, 75 ft • lb)
WARNING
to
"ENGINE
ASSEMBLY
Bolt (crankcase cover 2):
10 Nm (1.0 m • kg, 7.2 ft • lb)
Bolt (shift pedal):
10 Nm (1.0 m • kg, 7.2 ft • lb)
AND
Advertisement
Table of Contents
