Table of Contents
Advertisement
REAR SHOCK ABSORBER AND SWINGARM
5.Tighten:
Swingarm
Nut 1 (pivot shaft)
Nut 1 (pivot shaft):
105 Nm (10.5 m • kg, 75 ft • lb)
6.Install:
Nut 1 (connecting arm-relay arm)
Nut 1 (connecting arm-relay arm):
59 Nm (5.9 m • kg, 43 ft • lb)
7.Tighten:
Bolt 1 (chain case)
Bolt 2 (chain guide)
Bolt 1 (chain case):
7 Nm (0.7 m • kg, 5.1 ft • lb)
Bolt 2 (chain guide):
7 Nm (0.7 m • kg, 5.1 ft • lb)
8.Install:
Rear shock absorber
Refer to "REAR SHOCK ABSORBER".
9.Install:
Rear wheel
Refer to "REAR WHEEL".
10.Adjust:
Drive chain slack
Drive chain slack:
35 ~ 50 mm (1.38 ~ 1.97 in)
Refer to "DRIVE CHAIN SLACK ADJUST-
MENT" in CHAPTER 3.
6 - 70
CHAS
Advertisement
Table of Contents
