Table of Contents
Advertisement
TIRE INSPECTION
Be sure to install the correct tube when
using tube type tires.
After extensive tests, the tires mentioned
below have been approved by Yamaha
motor Co., Ltd. for this model. No guaran-
tee for handling characteristics can be
given if tire combinations other than
what is approved are used on this motor-
cycle. The front and rear tires should be of
the same manufacture and design.
Front:
Manufacturer
DUNLOP
Rear:
Manufacturer
DUNLOP
NOTE:
For tires with the "DRIVE" mark 1:
Install the wheel with the "DRIVE" mark
pointing in the rotating direction.
Align the light point mark (yellow) 2 with
the valve installation point.
WARNING
After mounting a tire, ride conservatively
to allow proper tire to rim seating. Failure
to do so may cause an accident resulting
in motorcycle damage and possible oper-
ator injury.
After a tire repair or replacement, be sure
to torque tighten the valve stem locknut
1 to specification.
Valve stem locknut 1:
1.5 Nm (0.15 m • kg, 1.1 ft • lb)
3 - 45
CHK
ADJ
Size
Type
80/100-21
Tube
51M
Size
Type
100/100-18
Tube
59M
Advertisement
Table of Contents
