Table of Contents
Advertisement
FRONT AND REAR BRAKE
WARNING
Proper hose routing is essential to insure
safe
motorcycle
"CABLE ROUTING" in CHAPTER 2.
Always use new copper washers.
3.Install:
Pin 1
Washer 2
Cotter pin 3
WARNING
Always use a new cotter pin.
4.Install:
Reservoir tank
NOTE:
At this time, temporarily install the reser-
voir tank without its cap and cap stopper.
5.Connect:
Brake hose
6.Fill:
Brake fluid
Recommended brake fluid:
DOT #4
CAUTION:
Brake fluid may erode painted surface or
plastic parts. Always clean up spilled fluid
immediately.
WARNING
Use only the designated quality brake
fluid: otherwise, the rubber seals may
deteriorate, causing leakage and poor
brake performance.
Refill with the same type of brake fluid:
mixing fluids may result in a harmful
chemical reaction and lead to poor perfor-
mance.
Be careful that water does not enter the
master cylinder when refilling. Water will
significantly lower the boiling point of the
fluid and may result in vapor lock.
6 - 33
CHAS
operation.
Refer
to
Advertisement
Table of Contents
