FRONT AND REAR BRAKE
WARNING
Never try to pry out the piston.
Cover the piston with a rag. Use care so
that the piston does not cause injury as it
is expelled from the cylinder.
*********************************
7.Remove:
Piston seals 1
CAUTION:
Remove the piston seal by pushing it in
with a finger. Do not use a screwdriver.
Rear brake
NOTE:
Before disassembling the rear brake caliper,
drain the brake system of its brake fluid.
WARNING
Securely support the motorcycle so there is
no danger of it falling over.
1.Remove:
Cover 1
2.Loosen:
Pad pins 2
Union bolt 3
3.Remove:
Rear wheel
Caliper assembly 1
Refer to "REAR WHEEL".
6 - 20
CHAS