Table of Contents
Advertisement
BATTERY INSPECTION
4.Check:
Battery condition
*********************************
Battery condition checking steps:
Connect a digital volt meter to the battery
terminals.
Tester (+) lead → Battery (+) terminal.
Tester (–) lead → Battery (–) terminal.
NOTE:
The state of a discharged MF battery can be
checked by measuring the open-circuit volt-
age (the voltage measured with the positive
terminal being disconnected).
Open-circuit voltage
12.8 V or more
Check the battery condition using the
given figures.
Example:
Open-circuit voltage = 12.0 V
Charging time = 6.5 hours
Condition of charge in battery = 20 ~ 30 %
*********************************
5.Charging method of MF batteries.
CAUTION:
If it is impossible to set the standard
charging current, be sure not to over
change.
When charging the battery, be sure to
remove it from the machine. (If charging
has to be done with the battery mounted
on the machine for some reason, be sure
to disconnect the wire at the negative ter-
minal.)
Never remove the sealing plug from the
MF battery.
3 - 50
CHK
ADJ
Charging time
No charging is
necessary.
Advertisement
Table of Contents
