Table of Contents
Advertisement
ENGINE ASSEMBLY AND ADJUSTMENT
ROTOR AND STARTER DRIVES
NOTE:
Fasten a safety wire to the timing chain to
prevent it from falling into the crankcase.
1.Apply:
4-stroke engine oil
(onto journal and starter drives)
2.Install:
Starter clutch
Bolt 1
Bolt 1 (Starter clutch):
10 Nm (1.0 m • kg, 7.2 ft • lb)
3.Install:
Plain washer 1
Bearing 2
4.Install:
Starter wheel gear 1
Woodruff key 2
5.Install:
Rotor
NOTE:
Temporarily install the rotor aligning the
key way of the rotor with the woodruff key.
Turn the starter wheel gear clockwise and
install the rotor to starter wheel gear.
4 - 52
ENG
Advertisement
Table of Contents
