Table of Contents
Advertisement
REAR SHOCK ABSORBER AND SWINGARM
Å
ı
5.Remove:
Brake hose holders 1
Rear brake caliper
6.Remove:
Chain case 1
Chain guide 2
NOTE:
When removing the chain case, lift up and
remove the chain case from the swingarm
L-shaped part 3 on the back.
7.Check:
Swingarm free play
*********************************
Inspection steps:
Check the tightening torque of the pivot
shaft (swingarm) securing nut 1.
Nut 1 (pivot shaft):
105 Nm (10.5 m • kg, 75 ft • lb)
Check the swingarm side play Å by mov-
ing it from side to side.
If side play is noticeable, check the inner
collar, bearing, washer and thrust cover.
Side play (at end of swingarm):
Limit: 1.0 mm (0.04 in)
Check the swingarm vertical movement ı
by moving it up and down.
If vertical movement is tight or if these is
binding, check the inner collar, bearing,
washer and thrust cover.
*********************************
6 - 64
CHAS
Advertisement
Table of Contents
