ENGINE DISASSEMBLY
2.Align:
Shift cam segment 1
NOTE:
Turn the shift cam to the position shown in
the figure so that it does not contact the
crankcase when separating the crankcase.
3.Remove:
Crankcase
CAUTION:
The crankcase should be separated from
right side.
Separate the crankcase after checking the
shift cam segment and removing the
drive axle circlip.
Do not damage the crankcase mating sur-
faces.
4.Remove:
Dowel pins
BALANCER, TRANSMISSION AND SHIFTER
1.Remove:
Shift shaft 1 1
Shift shaft 2 2
2.Remove:
Shift cam 1
Shift fork guide bar 2
Shift fork R 3
Shift fork C 4
Shift fork L 5
4 - 13
ENG