Table of Contents
Advertisement
FRONT AND REAR BRAKE
Front brake
1.Remove:
Brush guard
Brake lever
Return spring (brake lever)
Brake switch
NOTE:
Remove the brake switch by pushing up the
stopper with a thin screwdriver.
2.Remove:
Union bolt 1
Copper washers 2
NOTE:
Place a container under the master cylinder
to collect any remaining brake fluid.
3.Remove:
Master cylinder bracket 1
Master cylinder 2
4.Remove:
Master cylinder cap
Diaphragm
Rubber boot 1
Circlip 2
Master cylinder kit 3
NOTE:
Remove the circlip using circlip pliers.
Place a container under the master cylin-
der to collect any remaining brake fluid.
Rear brake
1.Remove:
Cotter pin 1
Washer 2
Pin 3
6 - 22
CHAS
Advertisement
Table of Contents
