Table of Contents
Advertisement
REAR SHOCK ABSORBER AND SWINGARM
Features
Water seepage is no longer a problem
since the polylube is solid. If water seeps
into the bearing, it will emulsify and will
not flow out.
Lubrication can continuously be supplied
to the contact points when heat is gener-
ated by the friction caused by the centrifu-
gal forces, since the lubricant is solid and
always remains inside the bearing.
CAUTION:
Be careful not to damage the solid lubri-
cation of the bearing when removing,
inspecting, or installing the bearing.
If the bearing is damaged, replace it with
a new one.
3.Inspect:
Swingarm 1
Bends/cracks/damage → Replace.
4.Inspect:
Connecting arm 1
Bends/cracks/damage → Replace.
Collars 2
Wear/damage → Replace.
5.Inspect:
Relay arm 1
Bends/cracks/damage → Replace.
Oil seals 2
Wear/damage → Replace.
Collars 3
Wear/damage → Replace.
6 - 67
CHAS
Advertisement
Table of Contents
