Table of Contents
Advertisement
2.Taillight does not come on.
1.Bulb and bulb socket
Check the bulb and bulb socket for conti-
nuity.
NB286220
2.Voltage
Connect the pocket tester (DC 20 V) to
the bulb socket connector.
Tester (+) lead → Blue 1 terminal
Tester (–) lead → Black 2 terminal
Turn the main switch to "ON".
Check for voltage (12 V) on the "Blue"
lead at the bulb socket connector.
This circuit is good.
CONTINUITY
MEETS
SPECIFICATION
7 - 30
LIGHTING SYSTEM
NO CONTINUITY
Replace the bulb and/or bulb socket.
OUT OF SPECIFICATION
Wiring circuit from main switch to bulb
socket connector is faulty, repair.
–
+
ELEC
Advertisement
Table of Contents
