Table of Contents
Advertisement
INSPECTION AND REPAIR
2.Inspect:
Oil pump driven gear 1
Oil pump 2
Wear/cracks/damage → Replace.
3.Inspect:
Oil strainer
Damage → Replace.
NB243012
ELECTRIC STARTER DRIVE
1.Inspect:
Starter idle gear 1 teeth 1
Starter idle gear 2 teeth 2
Burrs/chips/roughness/wear → Replace.
2.Inspect:
Starter wheel gear
(contacting surfaces)
Pitting/wear/damage → Replace.
3.Inspect:
Starter clutch assembly 1
Starter clutch 2
Wear/damage → Replace.
4.Check:
Starter clutch operation
*********************************
Checking steps:
Install the starter wheel gear to the starter
clutch, and hold the starter clutch.
When turning the starter wheel gear clock-
wise Å, the starter clutch and the wheel
gear should be engaged.
If not, the starter clutch is faulty. Replace it.
When turning the starter wheel gear coun-
terclockwise ı, the starter clutch gear
should turn freely.
If not, the starter clutch is faulty. Replace it.
*********************************
4 - 34
ENG
Advertisement
Table of Contents
