Table of Contents
Advertisement
FRONT FORK
DISASSEMBLY
1.Remove:
Cap bolt (from the inner tube)
2.Remove:
Cap bolt 1 (from the piston rod)
NOTE:
Remove the cap bolt using the rod holder
2.
Rod holder:
P/N. YM-01434
3.Remove:
Collars 1
Spring seats 2
Fork spring 3
4.Drain:
Fork oil
5.Remove:
Retaining clip 1
NOTE:
Use a thin screwdriver, and be careful not
to scratch the inner fork tube.
6.Remove:
Base valve 1
Damper rod assembly 2
Damper rod holder 3
NOTE:
When loosening the base valve 1 (damper
rod 2), the damper rod must be held with
the damper rod holder 3.
Damper rod holder:
P/N. YM-01418
6 - 37
CHAS
Advertisement
Table of Contents
