Table of Contents
Advertisement
FRONT FORK
4.Tighten:
Base valve 1 (damper rod)
Use the damper rod holder 2 to hold the
damper rod.
Damper rod holder:
YM-01418
Base valve (damper rod):
55 Nm (5.5 m • kg, 40 ft • lb)
LOCTITE
WARNING
Always use a new copper washer.
5.Install:
Oil seal 1
Use the fork seal driver weight 2 and
adapter 3.
Fork seal driver weight:
YM-33963
Adapter:
43 mm (1.69 in):
YM-8020
NOTE:
Before installing the oil seal, apply the lith-
ium soap base grease onto the oil seal lips.
CAUTION:
Be sure that the oil seal numbered side
faces upward.
NOTE:
Apply fork oil on the inner tube.
When installing the oil seal and dust seal
2, use a plastic sheet 1 lubricated with
fork oil to protect the oil seal lip.
Install the oil seal with its manufacturer's
marks or number facing the axle holder
side.
6 - 41
CHAS
®
Advertisement
Table of Contents
