Table of Contents
Advertisement
ENGINE OIL REPLACEMENT
7.Inspect:
O-ring
Damage → Replace.
8.Clean:
Oil filter
Clean it with solvent.
Clog/damage → Replace.
9.Install:
Oil filter 1
CAUTION:
Install the oil filter as shown.
Oil filter cover
Drain plug (crankcase)
10.Remove:
Oil filler cap
11.Fill:
Crankcase
CAUTION:
Do not allow foreign material to enter the
crankcase.
Do not add any chemical additives.
Engine oil also lubricates the clutch and
additives could cause clutch slippage.
12.Install:
Oil filler cap
13.Inspect:
Oil level
Refer to "ENGINE OIL LEVEL INSPEC-
TION".
Oil pressure
Refer to "OIL PRESSURE INSPECTION".
Oil leaks
3 - 23
CHK
ADJ
Bolt (oil filter):
10 Nm (1.0 m • kg, 7.2 ft • lb)
Drain plug (crankcase):
20 Nm (2.0 m • kg, 14 ft • lb)
With oil filter replacement:
1.2 L (1.06 Imp qt, 1.27 US qt)
Advertisement
Table of Contents
