Table of Contents
Advertisement
ENGINE ASSEMBLY AND ADJUSTMENT
10.Apply:
Lithium soap base grease
(onto the O-ring on starter motor)
11.Install:
Starter motor
Bolts (starter motor):
10 Nm (1.0 m • kg, 7.2 ft • lb)
12.Connect:
Starter motor lead 1
Ground lead 2
13.Install:
Gas chamber
Refer to "ENGINE REMOVAL".
14.Install:
Oil delivery pipe 3
15.Connect:
A.C. magneto lead 1
Neutral switch lead 2
16.Connect:
Spark plug lead
17.Connect:
Clutch cable
18.Adjust:
Clutch cable free play
Refer to "CLUTCH ADJUSTMENT" in
CHAPTER 3.
Free play:
10 ~ 15 mm (0.39 ~ 0.59 in)
at clutch lever end
4 - 66
ENG
Advertisement
Table of Contents
