Table of Contents
Advertisement
6
FRONT WHEEL
REMOVAL
WARNING
Securely support the motorcycle so there is
no danger of it falling over.
1.Place the motorcycle on a level place.
2.Elevate the front wheel by placing a suit-
able stand under the frame and engine.
3.Loosen:
Nuts (axle holder) 1
4.Remove:
Speedometer cable 2
Wheel axle 3
Front wheel
NOTE:
Do not depress the brake lever when the
wheel is off the motorcycle otherwise the
brake pads will be forced shut.
5.Remove:
Collar (left) 1
Speedometer gear unit 2
INSPECTION
1.Eliminate any corrosion from parts.
2.Inspect:
Wheel axle
Roll the axle on a flat surface.
Bends → Replace.
WARNING
Do not attempt to straighten a bent axle.
3.Inspect:
Tire
Wear/damage → Replace.
Refer to "TIRE INSPECTION" in CHAPTER
3.
Wheel
Bends/damage → Replace.
Refer to "WHEEL INSPECTION" in CHAP-
TER 3.
6 - 2
CHAS
Advertisement
Table of Contents
