Table of Contents
Advertisement
DRIVE CHAIN AND SPROCKETS
2.Install:
Rear wheel
Refer to "REAR WHEEL".
3.Install:
Drive chain 1
Drive sprocket 2
Washer 3
Nut 4
NOTE:
Tighten the nut (drive sprocket) while
applying the rear brake.
4.Install:
Chain joint 1
O-ring 2
Link plate 3
Use the drive chain cutter tool 4.
5.Install:
Chain joint clip 1
CAUTION:
Be sure to install the chain joint clip to the
direction as shown.
6.Adjust:
Drive chain slack
Refer to "DRIVE CHAIN SLACK ADJUST-
MENT" in CHAPTER 3.
6 - 76
CHAS
Nut (drive sprocket):
110 Nm (11.0 m • kg, 80 ft • lb)
Drive chain cutter:
P/N. YM-33858
Drive chain slack:
35 ~ 50 mm (1.38 ~ 1.97 in)
Advertisement
Table of Contents
