Table of Contents
Advertisement
FRONT WHEEL
INSTALLATION
Reverse the "Removal" procedure.
Note the following points.
1.Lubricate:
Wheel axle
Spacer 1
Bearings 2
Oil seal (lips) 3
Lithium soap base grease
2.Install:
Collar
NOTE:
Install the oil seal taking care not to damage
or reverse the lips.
3.Install:
Speedometer gear unit
NOTE:
Make sure that the wheel hub and the
speedometer gear unit are installed with
the projections meshed into the slots.
4.Install:
Front wheel assembly
NOTE:
Make sure that the slot in the speedometer
gear unit fits over the stopper on the front
fork outer tube.
5.Tighten:
Wheel axle
Wheel axle:
58 Nm (5.8 m • kg, 42 ft • lb)
6 - 5
CHAS
Advertisement
Table of Contents
