Table of Contents
Advertisement
Å
Å
Å
FRONT AND REAR BRAKE
ı
ı
ı
3.Inspect:
Master cylinder kits 1
Scratches/wear/damage → Replace as a
set.
Å Front
ı Rear
4.Inspect:
Reservoir tank 1 Cracks/damage →
Replace.
Diaphragm (front) 2
Diaphragm (rear) 3
Wear/damage → Replace.
5.Inspect:
Brake hoses (front, rear)
Cracks/wear/damage → Replace.
6.Measure:
Brake pads (thickness a)
Out of specification → Replace.
Å Front
ı Rear
Wear limit:
1.0 mm (0.04 in)
NOTE:
Replace the pad spring as a set if pad
replacement is required.
Replace the pads as a set if either is found
to be worn to the wear limit.
7.Inspect:
Brake discs (front and rear)
Galling/damage → Replace.
Å Front
ı Rear
6 - 25
CHAS
Advertisement
Table of Contents
