Table of Contents
Advertisement
ENGINE DISASSEMBLY
CAUTION:
Do not allow the rotor holder to touch the
projection 3 on the rotor.
7.Remove:
Rotor 1
Use the sheave holder 2 and rotor puller
3.
Rotor puller:
P/N. 2K7-85555-00
8.Remove:
Starter wheel gear 1
Woodruff key 2
Bearing
Washer
OIL FILTER
1.Remove:
Oil filter cover
2.Remove:
Oil filter 1
O-rings 2
CRANKCASE
1.Remove:
Bolts (crankcase)
NOTE:
Working in a crisscross pattern, loosen all
screws 1/4 turn each. Remove them after all
are loosened.
4 - 12
ENG
Advertisement
Table of Contents
