Table of Contents
Advertisement
FRONT AND REAR BRAKE
2.Remove:
Bolts 1
Caliper body 2
3.Remove:
Pad pins
Brake pads 1
Pad spring 2
NOTE:
Replace the pad spring if pad replacement
is required.
Replace the pads as a set if either is found
to be worn to the wear limit.
Wear limit a:
1.0 mm (0.04 in)
4.Inspect:
Caliper body 1
Cracks/damage → Replace caliper assem-
bly.
Rubber boot 2
Wear/cracks/damage → Replace.
Caliper bracket 3
5.Lubricate:
Guide pins
Recommended lubricant:
Lithium soap base grease
NOTE:
Place the rubber boot 2 securely in the groove
of the slide collar when installing the guide
pin.
6.Install:
Caliper bracket
6 - 15
CHAS
Advertisement
Table of Contents
