Table of Contents
Advertisement
REAR SHOCK ABSORBER AND SWINGARM
6.Install:
Air filter case
Refer to "REAR SHOCK ABSORBER AND
SWINGARM".
7.Install:
CDI unit
Rear frame 2
Swingarm
Reverse "REMOVAL" procedure.
Note the following points.
1.Lubricate:
Oil seal
Bushing
Thrust cover (inside)
Collar
Pivot shaft
Bolt (relay arm-swingarm)
Bolt (connecting arm-relay arm)
Bolt (connecting arm-frame)
Molybdenum disulfide grease
2.Tighten:
Nut 1 (swingarm-connecting arm)
Nut 1 (swingarm-connecting arm):
59 Nm (5.9 m • kg, 43 ft • lb)
3.Install:
Rubber caps
Chain protector
4.Install:
Bolt 1 (frame-relay arm)
Bolt 1 (relay arm):
46 Nm (4.6 m • kg, 33 ft • lb)
6 - 69
CHAS
Advertisement
Table of Contents
