Table of Contents
Advertisement
1 Rectifier/regulator lead
2 Main switch lead
3 Ignition coil lead
4 Throttle cable
5 Clutch cable
6 Wireharness
7 Battery (–) lead
8 Battery (+) lead
9 Starter relay lead
0 Fuse (main) lead
A Fuel tank breather hose
Å Install the clamp with its open side facing outward.
ı Tighten the main switch lead to the rectifier/regulator.
Ç Tighten the ignition coil lead to the ignition coil.
Î Pass the throttle cable 1 over the throttle cable 2.
‰ Install the clamp with its open side facing upward.
Ï Fasten the clutch cable at the white tape marker with a clamp.
Ì Pass the fuel tank breather hose under the handle tension bar.
Ó Affix the fuel tank breather hose and speedometer cable to the clamp.
È Pass the fuel tank breather hose and speedometer cable through the
wire guide.
Ô Fasten the speedometer cable at the white tape marker with a
clamp.
2 - 25
CABLE ROUTING
SPEC
Advertisement
Table of Contents
