Table of Contents
Advertisement
FRONT FORK
NOTE:
Position the inner fork tube end in such a
way that it is flush a with the top of the
handle crown.
2.Tighten:
Pinch bolts 1 (lower bracket)
Pinch bolts 2 (handlebar crown)
Cap bolt 3
Pinch bolt 1 (lower bracket):
30 Nm (3.0 m • kg, 22 ft • lb)
Pinch bolts 2 (handlebar crown):
23 Nm (2.3 m • kg, 17 ft • lb)
Cap bolt 3:
28 Nm (2.8 m • kg, 20 ft • lb)
3.Install:
Bolt (brake caliper)
Holder (brake hose)
Bolt (brake caliper):
23 Nm (2.3 m • kg, 17 ft • lb)
Bolt (brake hose holder):
7 Nm (0.7 m • kg, 5.1 ft • lb)
WARNING
Proper hose routing is essential to insure safe
motorcycle operation. Refer to "CABLE
ROUTING" in CHAPTER 2.
4.Install:
Front wheel
Bolt (wheel axle):
58 Nm (5.8 m • kg, 42 ft • lb)
Refer to "FRONT WHEEL".
5.Adjust:
Air pressure
Refer to "FRONT FORK ADJUSTMENT" in
CHAPTER 3.
Standard air pressure:
0 kPa (0 kg/cm
Maximum air pressure:
40 kPa (0.4 kg/cm
6 - 45
CHAS
2
, 0 psi)
2
, 5.7 psi)
Advertisement
Table of Contents
