For Chassis Service - Yamaha TTR250L Service Manual

10
Valve guide installer 5 mm (0.20 in)
P/N. YM-04098
This tool is needed to install the valve guides
properly.
12
Adapter (M10)
P/N. YU-90062
This tool is used to install the crankshaft.
14
®
Quick Gasket
P/N. ACC-11001-05-01
This sealant (bond) is used for crankcase mat-
ing surfaces, etc.
1
Damper rod holder
P/N. YM-01418
This tool is used to loosen and tighten the
damper rod holding bolt.
3
Rod holder
P/N. YM-01434
This tool is used to hold the fork spring.
SPECIAL TOOLS
11
Crankshaft installing set
P/N. YU-90050
These tools are used to install the crankshaft.
13
Crank pot spacer
P/N. YU-01202
This tool is used to install the crankshaft.

FOR CHASSIS SERVICE

2
Front fork seal drive weight
P/N. YM-33963-1
Adapter 43 mm (1.69 in)
P/N. YM-8020-2
These tools are used when installing the fork
oil seal.
4
Rod puller attachment (M10)
P/N. 90890-01436
This tool is used to pull up the fork damper
rod.
1 - 6
GEN
INFO