About Korg Format Files - Korg M3 Parameter Manual

Appendices
About KORG format files
KORG format file structure
There are three types of sample-related Korg-format files:
.KMP files for multisamples, .KSF files for samples, and
.KSC files which handle the first two as a collection. Similar
to the AIFF format, .KMP/.KSF files consist of chunks.
PIANO.KMP
PCMGROUP.KSC
Ac. Piano
PIANO.KMP
RHODES.KMP
SNARE_00.KSF
PI0000.KSF
PI0001.KSF
PI0002.KSF
PI0003.KSF
Unless stated otherwise, all data is Big Endian.
• When a Korg format file saved on the M3 is loaded by
the TRINITY,
• Of the parameters for each song, the following
parameters are ignored. (The chunk that includes the
parameter is given in parentheses)
Filter cutoff (RLP1 chunk)
Transpose (RLP2 chunk)
Resonance (RLP2 chunk)
Attack (RLP2 chunk)
Decay (RLP2 chunk)
Drive (RLP3 chunk)
Boost (RLP3 chunk)
LowEQLevel (RLP3 chunk)
MidEQLevel (RLP3 chunk)
HighEQLevel (RLP3 chunk)
• Of the parameters for each sample, reverse playback and
loop off settings (included in the attribute parameters of
the SMD1 chunk) will be ignored, and will be handled
respectively as forward playback and loop on. Only the
twelve types of sampling frequency supported by the
Trinity will be loaded correctly, and if the frequency is
unsupported, the next lowest frequency will be selected.
• Split sample files cannot be loaded.
• When a Korg format file saved on the TRINITY is
loaded into the M3,
• Compressed sample files cannot be loaded.
• Multisamples that use internal samples of the Trinity
will be assigned identically-numbered RAM samples.
• When loading a Korg-format file saved on the M3 into
a Triton
• Of the parameters for each song, the following
parameters are ignored (the chunk that includes the
parameter is given in parentheses)
Drive (RLP3 chunk)
Boost (RLP3 chunk)
LowEQLevel (RLP3 chunk)
630
Korg format file structure
PI0000.KSF
Multisample
parameters parameters
4
Relative parameters
(for 'x' number
of samples)
PI0002.KSF
parameters
PI0003.KSF
PI0003.KSF
parameters
SNARE_00.KSF
parameters
MidEQLevel
HighEQLevel
KMP (KORG Multisample Parameter) files
These consist of the following chunks.
• Multisample parameter chunk
Chunk ID ('MSP1')
Chunk size (fixed at 18)
Multisample name
Number of samples in the multisample
Sample Attributes
• Attributes
Sample data
Sample
MSB
Sample
Sample data
• Multisample name chunk
Chunk ID ('NAME')
Chunk size (fixed at 24)
Sample
Multisample name
Sample data
• Relative parameter chunk 1
Chunk ID ('RLP1')
Chunk size (18 × number of samples in the
multisample)
Original key
MSB 1: Non Transpose 0: Transpose
bits 6–0 original key
Top key (0–127)
Tune (–99...+99 cents)
Level (–99...+99 cents)
Pan (0–127 currently unused)
Filter cutoff (–99...+99 currently unused)
KSF filename (including period and extension)
[12 bytes] × number of samples in the multisample
If the .KSF filename is "SKIPPEDSAMPL", it will be treated
as a sample skipped during loading.
If the .KSF filename is "INTERNALnnnn", internal samples
will be used.
• Relative parameter chunk 2
Chunk ID ('RLP2')
Chunk size (4)
Transposing (–64...+63)
Resonance (–99...+99)
Attack (–99...+99)
Decay (–99...+99)
• Relative parameter chunk 3
Chunk ID ('RLP3')
Chunk size (fixed at 6)
Drive (–99...+99)
Boost (–99...+99)
LowEQLevel (–99...+99)
MidEQLevel (–99...+99)
HighEQLevel (–99...+99)
unused
• Multisample number chunk
Chunk ID('MNO1')
Chunk size (4)
Multisample number (0–)
(RLP3 chunk)
(RLP3 chunk)
Multisample parameter attributes
LSB
1: Not Use 2nd Start 0: Use It
NC(0)
[4 bytes]
[4 bytes]
[16 bytes]
[1 byte]
[1 byte]
[4 bytes]
[4 bytes]
[24 bytes]
[4 bytes]
[4 bytes]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[4 bytes]
[4 bytes]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[4 bytes]
[4 bytes]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[4 bytes]
[4 bytes]
[4 bytes]