0-1-3: Mixer T01-08, 0-1-4: Mixer T09-16 - Korg M3 Parameter Manual

0–1–3: Mixer T01–08,
0–1–4: Mixer T09–16
0–1
–3a
0–1
–3b
Here you can set the pan and volume of each MIDI track.
0–1–3(4)a: Location, Meter, Tempo,
Tempo Mode, Song Select,
Track Select, Reso, RPPR
For more information, please see "0–1–1: Program T01–08,
0–1–2: Program T09–16" on page 195.
0–1–3(4)b: Pan, Volume
The pan and volume that you specify here will be used
when you playback or record from the beginning of the
song. If you change the settings during recording, the
changes will be recorded as musical data, and pan and
volume will change during playback. You can also change
the settings during playback. However when the song
reaches a location where pan or volume data was recorded,
the settings will change accordingly.
Selected Track Info
This area shows information on the MIDI track selected for
editing.
For more information, please see "0–1–1(2)b: Track Program
Select" on page 197.
Track 01 (Track Number):
Category
This indicates the category.
Pan
Here you can set the pan of each MIDI track.
L001...C064...R127: A setting of L001 is far left and R127 is
far right. A setting of C064 will reproduce the oscillator pan
setting of the Program mode.
SEQ P0–1: Play/REC 0–1–3: Mixer T01–08, 0–1–4: Mixer T09–16
0–1
–3
Menu
[Category Name]
[RND, L001...C064...R127]
OSC1/EXi1
OSC2/EXi2 OSC1/EXi1:
Amp1 Pan=L001
OSC2/EXi2:
Left Center
Right Amp2 Pan=R127
Pan (CC#10)
C064
L032
L001
R096
R127
Left Center Right
OSC1/EXi1:
OSC1/EXi1 OSC2/EXi2
Amp1 Pan=C064
OSC2/EXi2:
Left Center
Right Amp2 Pan=C064
Pan (CC#10)
C064
L032
L001
R096
R127
Left Center Right
If a mono insert effect is in use, the settings you make here
will be ignored. In this case, the Pan: #8 parameter in P8–1:
IFX– Insert FX Setup page will adjust the panning of the
sound after the Insert Effect. For more information, please
see "Mixer" on page 430.
RND: The pan will change randomly at each note-on.
If Status (Seq 3–1(2)c) is INT or BTH, CC#10 Pan can be
received to control the panning. When receiving CC#10,
a value of 0 or 1 is far left, 64 is center, and 127 is far
right. When you change the song or return to the
beginning of the song, tracks whose Status is EXT, EX2
or BTH will transmit the pan you specify here as a
MIDI message (except for RND).
Volume
Here you can set the volume of each MIDI track.
Using the control surface to adjust the volume
You can use the control surface to adjust the Volume of each
track. These settings can be made from the front panel mixer
section, or display page. Here's how to adjust the volume
from the front panel.
Volume
1. Press the CONTROL ASSIGN MIXER switch to select
T1–8 or T9–16.
2. Use the MIX VOLUMES 1–8 sliders to control the vol-
ume.
When Status (Seq 3–1(2)c) is INT or BTH, CC#7 Volume
can be received to control the volume. The volume of a
track is determined by multiplying the MIDI Volume
(CC#7) and Expression (CC#11) values. When you
change the song or return to the beginning of the song,
tracks whose Status is EXT, EX2 or BTH will transmit
the volume you specify here as a MIDI Volume
message.
Track 02...08, 09...16 (Track Number):
For more information, please see "Track 01 (Track
Number):," above.
OSC1/EXi1
OSC2/EXi2 OSC1/EXi1:
Amp1 Pan=L032
OSC2/EXi2:
Left Center Right
Amp2 Pan=R096
Pan (CC#10)
C064
L032
L001
R096
R127
Left Center Right
[000...127]
199