Combi P1: Dt/Xy/Ctrls; 1-1: Drum Track - Korg M3 Parameter Manual

Combination mode
COMBI P1: DT/XY/Ctrls (Drum Track/X–Y/Controllers)
1–1: Drum Track
1–1a
1–1b
Here you can select a drum track pattern and specify how it
will sound.
Note: In Combination mode (unlike Program mode) there is
no dedicated timbre for the drum track. You can assign the
drum track program to be any timbre 1–16. The drum track
program will be played when the drum track's output MIDI
channel Output matches the timbre's MIDI channel MIDI
Channel.
In Combination mode, the drum track patterns are
triggered on the Global MIDI channel.
1–1a: Drum Pattern
Pattern
[(Preset): P000...P522, (User): U000...U999]
This selects the drum pattern.
Preset/User No.
P000
P001...P522
U000...U999
• U000–U999 can be written. Patterns you create in
Sequencer mode can be converted into user drum
patterns. (See page 291)
For details on creating user drum patterns, please see
"Drum Track function" on page 185 of the Operation
Guide.
Shift
This transposes the drum pattern in semitone steps. This
means that the instruments of the drum kit will change.
MIDI Channel
Output
This specifies the MIDI channel that will transmit the MIDI
data of the drum pattern. The drum pattern will sound
using the program of the timbre that is set to the same
channel as this MIDI channel.
Gch: The data will be sent to the channel specified by the
global MIDI channel MIDI Channel setting (Global 1–1a).
Whether the pattern data will be output to an external
device will depend on the Status setting of the timbre that
matches the Output MIDI channel.
138
[Preset, User]
Contents
Off
Preset drum patterns
For user/preloaded drum patterns
[–24...+00...+24]
[01...16, Gch]
1–1b: Trigger
Trigger Mode [Start Immediately, Wait KBD Trig]
1–1
Start Immediately: When you press the DRUM TRACK
Menu
ON/OFF switch to turn it on (LED lit), the drum pattern
will start according to the Sync setting. When you turn it on,
the drum pattern will stop.
Wait KBD Trig: When you press the DRUM TRACK ON/
OFF switch to turn it on (LED lit), the drum pattern will wait
to start. When you play the keyboard of the KYBD-61/73/
88, or when a MIDI note-on is received, the drum pattern
will start according to the Sync setting.
If you've selected Start Immediately, the DRUM
TRACK ON/OFF switch will always be saved in the
OFF state.
Note: You can link KARMA with the drum track pattern
playback. For more information, please see "Link to Drum
Trk" on page 6.
Sync
Off: The drum pattern will not synchronize to the currently-
running KARMA, but will start immediately.
On: The drum pattern will synchronize to the currently-
running KARMA.
Note: Use P7–1: KARMA1–Trigger Quantize Trigger to
specify whether KARMA will synchronize to the currently-
running drum pattern.
Latch
This is valid if Trigger Mode is Wait KBD Trig.
Off: If the DRUM TRACK ON/OFF switch is on (LED
blink), the pattern will start when you play the keyboard
(note-on). The pattern will stop when you release the
keyboard (note-off).
On: If the DRUM TRACK ON/OFF switch is on (LED
blink), the pattern will start when you play the keyboard
(note-on). The pattern will continue when you release the
keyboard (note-off). The pattern will stop when you turn the
DRUM TRACK ON/OFF switch off (LED dark).
Use KARMA Latch Switch: The on/off status of the
KARMA LATCH switch will correspond to the above Off
and On modes of operation. You will probably want to use
this in conjunction with KARMA's Latch operation.
Zone:
Keyboard
Bottom
Top
This is valid if Trigger Mode is set to Wait KBD Trig.
It specifies the range of keys that will start the drum pattern.
Velocity:
Bottom
Top
This is valid if Trigger Mode is set to Wait KBD Trig.
It specifies the range of velocities that will start the drum
pattern.
[Off, On, Use KARMA Latch Switch]
[Off, On]
[C–1...G9]
[C–1...G9]
[001...127]
[001...127]