0-3: Utility; 0-4: Make Audio Cd - Korg M3 Parameter Manual

0–3: Utility
0–1b
0–1c
0–1a
Here you can rename, copy, or delete the selected media or
file, create a new directory, format, and set the date and
time.
After selecting a media or file, select the desired menu
command.
▼0–3: Menu Command
• 0: Hide unknown files ☞p.398
• 1: Translation ☞p.398
• 2: Lock/Unlock selected ☞p.398
• 3: Sort ☞p.398
• 4: Rename ☞p.412
• 5: Copy ☞p.412
• 6: Delete ☞p.413
• 7: Create Directory ☞p.413
• 8: Set Date/Time ☞p.413
• 9: Format ☞p.413
• 10: Convert to ISO9660 Format ☞p.414
• 11: Rate Convert ☞p.414
• 12: Check Medium ☞p.414
For more information, please see "Media: Menu Command"
on page 398.
0–4: Make Audio CD
0–3
Menu
0–4a
0–4b
0–4c
Here you can use a CD-R/RW drive connected to the USB A
connector to create an audio CD.
You can create an audio CD from WAVE files that you
created by resampling the M3's sequencer playback etc. and
saved on an external USB storage device. Use the Insert
button and Cut button to arrange your songs in the audio
CD track list, and use the menu command Write to CD to
write them to the CD.
Audio CDs are created from 44.1 kHz or 48 kHz WAVE files.
Note: WAVE files with a sampling frequency of 48 kHz will
automatically be converted to 44.1 kHz when written to an
audio CD (Write to CD).
Note: You can play back a WAVE file by selecting
(highlighting) it and pressing the SAMPLING START/STOP
switch.
What is Finalize?
In order for an audio CD to be playable on a conventional
CD player, or to be played on the M3 (Media 0–5: Play
Audio CD page, Sampling P5: Audio CD page), the Finalize
operation must be executed after all the desired audio CD
tracks have been written to the CD-R/RW disc.
On the M3, the menu command Write to CD allows you to
simply write the audio CD tracks without finalizing the disc,
and this means that other audio CD tracks can be added to
that CD-R/RW disc at a later time.
No more audio CD tracks can be added to a disc once that
disc has been finalized, so be sure that all desired audio CD
tracks have been written before you finalize.
0–4a: Track, Total, Free
Track (Track Select)
Specifies the track number that will be displayed at the top
of the audio CD track list.
If unfinalized media is inserted, this field will indicate the
number that follows the last track number on that media.
For example if data up to Track (Track Select) 05 has already
been written, this will indicate 06 and following (up to 99).
If "WAVE file" ====End==== is at the top, this will indicate
--. Up to 99 tracks can be registered using the Insert button.
Total
Displays the total time of all WAVE files in the track list.
If the Total time is greater than Free, writing to CD-R/
RW media will not be possible.
Media: File 0–3: Utility
0–4
Menu
[01...99, --]
[00:00...]
393