Delay; 055: L/C/R Delay; 056: Stereo/Crossdelay - Korg M3 Parameter Manual

Effect Guide

Delay

055: L/C/R Delay

This multitap delay outputs three Tap signals to the left,
right, and center respectively. You can also adjust the left
and right spread of the delay sound.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Input Level D-mod
+
High Damp Low Damp
Input Level D-mod
Right
L Delay Time
0...2730
[msec]
a
Level 0...50
C Delay Time
0...2730
[msec]
b
Level 0...50
R Delay Time
0...2730
[msec]
c
Level 0...50
Feedback
–100...+100
(C Delay)
d Src Off...Tempo
Amt –100...+100
High Damp
0...100
[%]
e
Low Damp
0...100
[%]
Input Level
–100...+100
Dmod [%]
f
Src Off...Tempo
g Spread 0...50
Dry, 1 : 99...
Wet/Dry
99 : 1, Wet
h Src Off...Tempo
Amt –100...+100
e: High Damp [%]
e: Low Damp [%]
These parameters set the damping amount of high range
and low range. The tone of the delayed sound becomes
darker and lighter as it feeds back.
g: Spread
This parameter sets the pan width of the effect sound. The
stereo image is widest with a value of 50, and the effect
sound of both channels is output from the center with a
value of 0.
476
Wet / Dry
L Delay
Level
C Delay
Spread
Level
Feedback
R Delay
Level
Wet / Dry
Sets the delay time of TapL
Sets the output level of TapL
Sets the delay time of TapC
Sets the output level of TapC
Sets the delay time of TapR
Sets the output level of TapR
Sets the feedback amount of
TapC
Selects the modulation source
of the TapC feedback amount
Sets the modulation amount of
the TapC feedback amount
Sets the damping amount in
the high range p.476
Sets the damping amount in
the low range p.476
Sets the modulation amount of
the input level p.472
Selects the modulation source
for the input level p.472
Sets the width of the stereo
image of the effect sound
p.476
Sets the balance between the
effect and the dry input
Selects a modulation source for
Wet/Dry
Sets the modulation amount
for Wet/Dry

056: Stereo/CrossDelay

This is a stereo delay, and can by used as a cross-feedback
delay effect in which the delay sounds cross over between
the left and right by changing the feedback routing.
Stereo In - Stereo Out
Left
High Damp Low Damp
Delay
Input Level D-mod
Stereo/Cross Feedback
High Damp Low Damp
Input Level D-mod
Delay
Right
Switches between stereo delay
a Stereo/Cross Stereo, Cross
and cross-feedback delay
b L Delay Time Sets the delay time for the left
0.0...1360.0
[msec] channel
R Delay Time Sets the delay time for the right
c 0.0...1360.0
[msec] channel
Sets the feedback amount for
L Feedback –100...+100
the left channel
Selects the modulation source
d Src Off...Tempo
of feedback amount
Sets the modulation amount of
Amt L –100...+100
the left channel feedback
Sets the feedback amount for
R Feedback –100...+100
the right channel
e
Sets the modulation amount of
Amt R –100...+100
the right channel feedback
High Damp Sets the damping amount in
f 0...100
[%] the high range
g Low Damp Sets the damping amount in
0...100
[%] the low range
Input Level Sets the modulation amount of
–100...+100
Dmod [%] the input level
h
Selects the modulation source
Src Off...Tempo
for the input level
Sets the width of the stereo
i Spread –50...+50 image of the effect sound
Dry, 1 : 99... Sets the balance between the
Wet/Dry
99 : 1, Wet effect and the dry input
Selects a modulation source for
j Src Off...Tempo
Wet/Dry
Sets the modulation amount
Amt –100...+100
for Wet/Dry
Wet / Dry
Spread
Stereo/Cross
Wet / Dry
p.476
p.476
p.472
p.472
p.476