089: Limiter - P4Eq - Korg M3 Parameter Manual

Effect Guide

089: Limiter - P4EQ

(Limiter - Parametric 4-Band EQ)
This effect combines a mono limiter and a four-band
parametric equalizer. You can change the order of the effects.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Limiter
+
Limiter
Right
Envelope - Control
LIMITER
1.0 : 1...
[L]Ratio
50.0 : 1, Inf : 1
a
Threshold
–40...0
[dB]
[L]Attack 1...100
b
Release 1...100
[L]Gain –Inf,
c
Adjust [dB] –38...+24
P4EQ
d [E]Trim 0...100
[E]B1 Cutoff
20...1.00k
[Hz]
e
Q 0.5...10.0
Gain [dB] –18...+18
[E]B2 Cutoff
50...5.00k
[Hz]
f
Q 0.5...10.0
Gain [dB] –18...+18
[E]B3 Cutoff
300...10.00k
[Hz]
g
Q 0.5...10.0
Gain [dB] –18...+18
[E]B4 Cutoff
500...20.00k
[Hz]
h
Q 0.5...10.0
Gain [dB] –18...+18
Limiter ➝
i Routing P4EQ, P4EQ
➝ Limiter
Dry, 1 : 99...
Wet/Dry
99 : 1, Wet
j Src Off...Tempo
Amt –100...+100
a: [L]Ratio
a: Threshold [dB]
c: [L]Gain Adjust [dB]
This parameter sets the signal compression [L]Ratio.
Compression is applied only when the signal level exceeds
the Threshold value.
Adjust the output level using the Gain Adjust parameter,
since compression causes the entire level to be reduced.
494
Routing
Parametric 4Band EQ
Trim
Gain Adjust
Sets the signal compression
ratio p.494
Sets the level above which the
compressor is applied
p.494
Sets the attack time
Sets the release time
Sets the limiter output gain
p.494
Sets the parametric EQ input
level
Sets the center frequency of
Band 1
Sets the bandwidth of Band 1
p.445
Sets the gain of Band 1
Sets the center frequency of
Band 2
Sets the bandwidth of Band 2
p.445
Sets the gain of Band 2
Sets the center frequency of
Band 3
Sets the bandwidth of Band 3
p.445
Sets the gain of Band 3
Sets the center frequency of
Band 4
Sets the bandwidth of Band 4
p.445
Sets the gain of Band 4
Switches the order of the
limiter and parametric EQ
Sets the balance between the
effect and the dry input
Selects a modulation source for
Wet/Dry
Sets the modulation amount
for Wet/Dry
Output Level
Wet / Dry
Level
Wet / Dry
Limiter - Threshold / Ratio
Ratio=1.0 : 1
Ratio=2.0 : 1
Threshold
Ratio=4.0 : 1
Ration=Inf : 1
Louder
Input Level
Dry Ratio=1.0 : 1
Ratio=2.0 : 1
Ratio=4.0 : 1
Threshold
Ratio=Inf : 1
Time