Combi P9: Mfx/Tfx (Master/Total Effect); 9-1: Routing - Korg M3 Parameter Manual

COMBI P9: MFX/TFX (Master/Total Effect)

Here you can make settings for the master effects and total
effect. For instance, you can:
• Route a sound to an master effects and total effect
• Make detailed settings for master effects and total effect
For more information, please see "Effect Guide" on
page 421.
9–1: Routing
9–1a
9–1b
9–1c
• Here you can specify the type of master effects 1, 2 and
total effect, and turn them on/off.
• The master effects are sent to the L/R bus. The total
effect is inserted into the L/R bus.
These parameters are the same as in Program mode. For
more information, please see "9–1: Routing" on page 103.
9–1a: Combination Name
These are the bank, number, and name of the current
Combination. For more information, please see "0–1(2)a:
Combination Select" on page 120.
9–1b: MFX1, 2
MFX1:
MFX1
MFX1 On/Off
Return 1
MFX2:
MFX2
MFX2 On/Off
Return 2
Chain:
Chain On/Off
Chain Direction [MFX1→MFX2, MFX2→MFX1]
Chain Level
For more information, please see "9–2: MFX1" on page 104.
COMBI P9: MFX/TFX (Master/Total Effect) 9–1: Routing
9–1c: TFX
TFX:
TFX
TFX On/Off
For more information, please see "9–4: TFX" on page 105.
9–1d: Master Volume
Master Volume
9–1
Menu
For more information, please see "9–1c: Master Volume" on
page 104.
▼9–1: Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
9–1d
• 3: Copy MFX/TFX ☞p.118
• 4: Swap MFX/TFX ☞p.118
For more information, please see "Combination: Menu
Command" on page 185.
[000...170]
[Off, On]
[000...127]
[000...153]
[Off, On]
[000...127]
[Off, On]
[000...127]
[000...153]
[Off, On]
[000...127]
183