Combi P5-2: Midi Filter 2; 5-2-1: -5 T01-08, 5-2-2: -5 T09-16; 5-2-3: -6 T01-08, 5-2-4: -6 T09-16 - Korg M3 Parameter Manual

Combination mode
COMBI P5–2: MIDI Filter 2
5–2–1: –5 T01–08,
5–2–2: –5 T09–16
5–2
–1a
5–2
–1b
5–2
–1c
5–2–1(2)a: Combination Name, Tempo
5–2–1(2)b: Timbre Info
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 147.
5–2–1(2)c: MIDI Filter5
Timbre 01 (Timbre Number):
Enable SW1
Enable SW2
Specifies whether or not the effect of the SW1 and SW2
switches will be transmitted and received.
SW1 and SW2 are controlled by the KYBD-61/73/88's SW1
and SW2 switches.
The function of these switches is specified in the P1: DT/
XY/Ctrls– Controllers Setup page.
These settings are valid if these keys are assigned to SW1
Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW
(CC#65).
Enable Foot Switch
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be transmitted and received. The function is
assigned in Global P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Foot Pedal
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be transmitted and received. The function is
assigned in Global P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter5 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see "Timbre 01 (Timbre Number):," above.
160
▼5–2–1(2): Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.185
• 2: Exclusive Solo ☞p.185
5–2
–1
• 3: Copy from Program ☞p.185
Menu
For more information, please see "Combination: Menu
Command" on page 185.
5–2–3: –6 T01–08,
5–2–4: –6 T09–16
5–2
–3a
5–2
–3b
5–2
–3c
[Off, On]
5–2–3(4)a: Combination Name, Tempo
[Off, On]
5–2–3(4)b: Timbre Info
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 147.
5–2–3(4)c: MIDI Filter6
Timbre 01 (Timbre Number):
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not covered
[Off, On]
in the preceding items MIDI Filter will be transmitted and
received.
Enable KARMA Waveform SysEx
This allows you to enable or disable the System Exclusive
messages used by KARMA Wave Sequencing.
[Off, On]
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter6 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see "Timbre 01 (Timbre Number):," above.
▼5–2–3(4): Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.185
• 2: Exclusive Solo ☞p.185
• 3: Copy from Program ☞p.185
For more information, please see "Combination: Menu
Command" on page 185.
5–2
–3
Menu
[Off, On]