Mixer T1-8, Mixer T9-16 - Korg M3 Parameter Manual

Sequencer mode
MIX PLAY/MUTE 1–8 switches and the MIX VOL-
UME sliders
Reset controls
The front panel RESET CONTROLS switch resets the
desired sliders and switches of the control surface to their
values when the song was selected. You can also use this to
reset the KARMA module settings.
Resetting a single control
To reset individual controls:
1. Hold down the RESET CONTROLS switch.
2. While holding down RESET CONTROLS, move a
slider, or press one of the control surface buttons.
The slider or switch will be reset to the value it had when
the song was selected.
3. When you're done, release the RESET CONTROLS
switch.
Resetting a group of controls
To reset a group of controls at once:
1. Make sure that the Control Surface is showing the
parameters you want to reset.
As a safety precaution, you can only reset the parameters
currently displayed on the Control Surface.
For instance, if you want to reset the volume and pan for
MIDI Tracks 1–8, make sure that Control Assign is set to
MIXER 1–8.
2. Hold down the RESET CONTROLS switch.
3. While holding down RESET CONTROLS, press the
current CONTROL ASSIGN switch again.
All of the sliders, and switches shown on the Control
Surface will be reset to the value it had when the song was
selected.
Resetting KARMA Module parameters
In addition to the above reset operations, you can also
perform the following reset operations for KARMA.
• To reset the sliders or switches of each KARMA module,
hold down the RESET CONTROLS switch and press the
KARMA MODULE CONTROL switch.
• To reset the KARMA scene, hold down the RESET
CONTROLS switch and press the SCENE 1/5–4/8
switch whose LED is blinking.
0–2–8a: Track Select, Tempo, RPPR
Track Select
(Tempo)
RPPR
Here you can select the track, specify the tempo that will
control KARMA etc., and turn RPPR on/off.
For more information, please see "0–1–1(2)a: Location,
Meter, Tempo, Tempo Mode, Song Select, Track Select, Reso,
RPPR" on page 195.
0–2–8b: Control Assign
Control Assign
Input, RT Control, External, Tone Adjust, KARMA]
This selects the items that will be controlled by the control
surface. You can also press one of the CONTROL ASSIGN
switches to make this selection.
For details on each selection, please see the explanations that
follow.
208
[Track 01...16, Master Track]
[040.00...300.00, EXT]
[Off, On]
[Mixer T1–8, Mixer T9–16, Mixer
Mixer T1–8, Mixer T9–16
0–2
–8a
0–2
–8b
0–2
–8c
0–2–8c: Mixer T1–8, Mixer T9–16
Here you can adjust the volume of MIDI tracks 1–16, and
switch the Play/Mute and Solo On/Off status.
Use the CONTROL ASSIGN MIXER switch to select the
tracks to be controlled (1–8 or 9–16)
Track Play/Rec/Mute:
MIX Play/Rec/Mute 1 (9)... 8 (16) switches
Use each switch to change the Play/Rec/Mute status of the
corresponding track.
The switch LED will change as follows.
Play: lit
Rec: blinking
Mute: dark
Track Play/Mute
This switches each track between Play or Muted status.
Track Solo:
Panel-Switch Solo Mode On and MIX PLAY/MUTE
1 (9)...8 (16) switches
Use the menu command Panel-Switch Solo Mode On to
specify whether the MIX PLAY/MUTE 1–8 switches will
control Play/Mute or Solo On/Off.
If Panel-Switch Solo Mode On is On (checked), these
switches will control Solo On/Off.
The switch LED will change as follows.
Solo On: lit
Solo Off: dark
Tip: You can turn Panel-Switch Solo Mode On on/off by
holding down the ENTER switch and pressing numeric key
1.
Solo
This switches the Solo On/Off setting of each track.
Note: The Solo function applies to each track and the audio
inputs.
Exclusive Solo
The menu's Exclusive Solo parameter also affects the way
that Solo works. When Exclusive Solo is Off (unchecked),
you can solo multiple Tracks and Audio Inputs at once.
When Exclusive Solo is On (checked), only one Track or
Audio Input can be soloed at a time. In this mode, pressing a
SOLO button automatically disables any previous solos.
0–2
–8
Menu
[Play, Mute]
[Off, On]