Korg M3 Parameter Manual page 156

Combination mode
Pads and MIDI Channel
Gch
Gch
Pad1
2ch
Pad2
Gch
Gch
Pad1
3ch
Pad2
Notes 1–8
These parameters let you edit the 8 notes assigned to each
pad, along with a separate velocity for each note. To play
fewer than 8 notes, just set the unwanted notes to Off.
Off: Select this to disable the note.
C–1...G9: This sets the note number.
001...127: This sets the note's velocity value.
For more detailed instructions, please see "1–7(8)a: Pads
Chord" on page 36.
Pad 2...4, 5...8
These are the same as for Pad 1, as described above.
▼1–7(8): Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy from Program ☞p.185
• 4: Copy Pad Setup ☞p.112
For more information, please see "Combination: Menu
Command" on page 185.
146
T01: Piano Gch
T02: Strings Gch
T03: Bell 2ch
KARMA Module A
T01: Piano Gch
In: Gch/Out:Gch
KARMA Module B
T02: Strings 2ch
In: Gch/Out:2ch
KARMA Module C
T03: Bell 3ch
In: 3ch/Out:3ch
[Off, C–1...G9 / 001...127]