Seq P5: Midi Filter; Seq P5-1: Midi Filter 1; 5-1-1: -1 T01-08, 5-1-2: -1 T09-16 - Korg M3 Parameter Manual

SEQ P5: MIDI Filter

Here you can select whether or not to apply filtering to the
MIDI data received by MIDI tracks 1–16. For example even
if two tracks are receiving the same MIDI channel, one can
be set to respond to damper pedal activity while the other
does not.
These MIDI filter settings have no effect on the MIDI
messages that have already been recorded.
These settings affect the MIDI messages that are
transmitted when you adjust program, pan, volume,
portamento and send 1/2 parameters of a track whose
Status (Seq 3–1(2)c) is set to BTH, EXT, or EX2.
On (checked): Reception of MIDI data is enabled. Tracks
whose Status (Seq 3–1(2)c) is INT or BTH will receive these
types of MIDI messages on their respective channels. The
type of effects that are checked will be applied to the
program of each track when the M3's controllers are
operated or when MIDI data is received. (The effect
SEQ P5–1: MIDI Filter 1
5–1–1: –1 T01–08,
5–1–2: –1 T09–16
5–1
–1a
5–1
–1b
5–1
–1c
5–1–1(2)a: Track Select, Tempo, RPPR
5–1–1(2)b: Track Info
For more information, please see "2–1: Trim T01–08, 2–2:
Trim T09–16" on page 224.
5–1–1(2)c: MIDI Filter 1
Track 01 (Track Number):
Enable Program Change
Specifies whether or not MIDI program change messages
will be received.
Enable After Touch
Specifies whether or not MIDI after touch messages will be
received.
Enable Damper
Specifies whether or not MIDI CC#64 hold (damper pedal)
messages will be received.
SEQ P5: MIDI Filter 5–1–1: –1 T01–08, 5–1–2: –1 T09–16
dynamic modulation function is not affected by these
settings.)
Settings that regulate MIDI transmission/reception of the
M3 itself are made in MIDI Filter (Global 1–2b).
If the user-assignable controllers that can be filtered in the
MIDI Filter 1–4 and 2–5 pages are set to MIDI control
changes, filtering will be performed for these control
changes. In this case, any control change filtering that is
being performed in the MIDI Filter 1–1 to 1–3 pages will be
given priority. Furthermore, if the same control change is
assigned to multiple controllers for which there are filter
settings in the MIDI Filter 1–4 and 2–5 pages, checking any
one of these will enable that control change.
Off (unchecked): Reception of MIDI data is disabled.
Note: MIDI CC# = MIDI control change message numbers.
Enable Portamento SW
Specifies whether or not MIDI CC#65 portamento on/off
messages will be received.
Track 02...08, 09...16 (Track Number):
5–1
These are the MIDI Filter 1 settings for MIDI tracks 2–8 and
–1
Menu
9–16. They are the same as for track 1. For more information,
please see "Track 01 (Track Number):," above.
▼5–1–1(2): Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Rename Song ☞p.271
• 4: Delete Song ☞p.271
• 5: Copy From Song ☞p.271
• 6: Load Template Song ☞p.271
• 7: Save Template Song (Save as User Template
Song) ☞p.272
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: GM Initialize ☞p.273
• 11: Copy From Combi (Copy from
Combination) ☞p.273
• 12: Copy from Program ☞p.273
[Off, On]
For more information, please see "Sequencer: Menu
Command" on page 271.
[Off, On]
[Off, On]
[Off, On]
235