Korg M3 Parameter Manual page 423

Example)
PRELOAD1.* : PRELOAD1.PCG, PRELOAD1.SNG,
PRELOAD1.KSC, ...
PRELOAD?.PCG : PRELOAD1.PCG, PRELOAD2.PCG,
PRELOAD3.PCG, ...
When wildcards are used, only files will be subject to
copying. Directories will not be copied.
4. Use the Open button and Up button to select the copy
destination directory.
If you wish to specify a different USB device, use Media
Select (Media 0–1a) to select it.
5. If you wish to copy the file or directory with a different
name, use the text edit button (in the lower line) to
access the text input dialog box, and specify the name
with which the file or directory will be copied.
If you're using wildcards to copy multiple files
simultaneously, you won't be able to change the file name.
6. To copy the data, press the OK button. To cancel with-
out copying, press the Cancel button.
Note: If you decide not to copy, press the Abort button.
If the drive that you selected in Media Select is
removable media (CD-R/RW, MO disc, removable hard
disk etc.), it is not possible to copy to different media on
the same drive.
Delete
This command deletes the selected file or directory.
This command is valid only if a DOS file or directory is
selected.
1. Select the file or directory that you want to delete.
2. Select "Delete" to open the dialog box.
3. Delete will indicate the name of the selected file or
directory.
If you wish to change the file or directory that is to be
deleted, use the text edit button to access the text input
dialog box, and specify the name of the file or directory that
you wish to delete. (See OG page 197)
(Can use */? as Wildcard): When you use the text edit
button to access the text input dialog box and specify the
name of the file to be deleted, you can use the "*" or "?"
characters as wildcards. This allows you to simultaneously
delete multiple files with identical filenames and different
extensions, or files whose names are partially identical (see
"Copy" on page 412).
When wildcards are used, only files will be subject to
deletion. Directories will not be deleted.
4. To delete the selected file or directory, press the OK
button. To cancel without deleting, press the Cancel
button.
Media: Menu Command Delete
Create Directory
This command creates a new directory within the current
directory.
1. Select "Create Directory" to open the dialog box.
2. Use the text edit button to access the text input dialog
box, and specify the name of the new directory (See OG
page 197).
3. To create the directory, press the OK button. To cancel
without creating the directory, press the Cancel button.
Set Date/Time
This command sets the date and time of the M3's internal
calendar.
1. Select "Set Date/Time" to open the dialog box.
2. Set each parameter.
Year 1980–2037
Month 1–12
Day 1–31
Hour 0–23
Minute 0–59
Second 0–59
3. To set the date and time, press the OK button. To cancel,
press the Cancel button.
Format
This command formats the selected media. The volume
label (a name for the entire media) you specify will be
assigned to the media. The volume label you assign here
will be displayed in Media Select (Media 0–1a). The volume
label can be a maximum of eleven characters.
When you format, all data saved on that media will be
erased. If you had used a computer etc. to set up that
drive so that it can be used as multiple drives
(partitions), this data will also be erased. Be sure to
double-check before you format.
After formatting, it is not possible to press the
COMPARE switch to return to the previous state.
1. Make sure that the media you want to format is
inserted.
2. Use Media Select to select the media that will be for-
matted.
3. Select "Format" to open the dialog box.
413