Korg M3 Parameter Manual page 208

Sequencer mode
Mute: The track will be muted (silent).
Note: You can use the MIX PLAY/MUTE 1–8 switches to
control the setting. The switch LED will change as follows.
Play: lit
Rec: blinking
Mute: dark
Solo On/Off
Turns the Solo function on/off for each track.
Only tracks with Solo On will sound. Other tracks will be
muted.
The setting will alternate on/off each time you press the
SOLO button.
The operation will depend on the Exclusive Solo setting.
Exclusive Solo off: Multiple tracks can be soloed. The solo
setting of each track will change each time you press its Solo
On/Off button.
Exclusive Solo on: When you press a Solo On/Off button,
only that track will be soloed.
Note: You can use the MIX PLAY/MUTE 1–8 switches to
control the setting. The switch LED will change as follows.
Solo On: lit
Solo Off: dark
If MIDI tracks whose Status (Seq 3–1(2)c) is BTH, EXT,
or EX2 are muted by Mute or by the Solo function, note
on/off messages will not be transmitted on the MIDI
channel selected for those tracks.
Note: The Solo function applies to tracks 1–16 and audio
inputs.
Solo settings are not saved with the song.
Using the control surface to make mute and solo
settings
You can use the control surface to edit the mix parameters
for each track, including Play/Mute, and Solo On/Off.
These can also be controlled from the mixer section of the
front panel, or from the display.
Play/Mute
1. Press the CONTROL ASSIGN MIXER switch to select
T1–8 or T9–16.
2. Use the MIX PLAY/MUTE 1–8 switches to switch the
Play/Mute status of each track.
Note: If the Solo On/Off status changes instead of Play/
Mute, you'll need to uncheck the Panel–SW Solo Mode On
menu command.
Solo On/Off
1. Press the CONTROL ASSIGN MIXER switch to select
T1–8 or T9–16.
2. Select the menu command Panel–SW Solo Mode On so
that it has a check mark. Alternatively, hold down the
ENTER switch and press the key 1.
3. Use the MIX PLAY/MUTE 1–8 switches to switch the
Solo On/Off status of each track.
Track 02...08, 09...16 (Track Number):
Here you can specify the program, Play/Mute status, and
Solo On/Off status for Tracks 2–8 and 9–16. These are the
same as for Track 01. For more information, please see
"Track 01 (Track Number):," above.
198
▼0–1–1(2): Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Rename Song ☞p.271
• 4: Delete Song ☞p.271
[On, Off]
• 5: Copy From Song ☞p.271
• 6: Load Template Song ☞p.271
• 7: Save Template Song (Save as User Template
Song) ☞p.272
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: GM Initialize ☞p.273
• 11: Copy From Combi (Copy from
Combination) ☞p.273
• 12: Copy from Program ☞p.273
• 13: Copy X–Y Motion ☞p.107
For more information, please see "Sequencer: Menu
Command" on page 271.