7-1-6: Cc Offset; 7-1-7: Scene Matrix - Korg M3 Parameter Manual

Music workstation/sampler
Hide thumbs Also See for M3:
Table of Contents

Advertisement

Sequencer mode
7–1–6: CC Offset
7–1
–6a
These parameters specify the MIDI control change messages
(CC Offset parameters) transmitted when the KARMA
function is turned on.
7–1–6a: CC Offset
These settings specify the MIDI control change messages
and values that are transmitted from each KARMA Module
to the tone generator when you press the KARMA ON/OFF
switch to turn on the KARMA function or when you select a
song for which the KARMA function is turned on.
These messages will be transmitted on the Out (Output
Channel) (Seq 7–1–1c) of the KARMA Module.
Note: If the GE also generates the same control change
messages as those you specify here, the control change
messages generated by the GE will be given priority.
1, 2, 3, 4:
CC# (Number)
Value
For more information, please see "7–1–4a: CC Offset" on
page 80, and "7–1–6a: CC Offset" on page 165.
▼7–1–6: Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy KARMA Module ☞p.114
• 4: Initialize KARMA Module ☞p.115
• 5: Copy Scene ☞p.115
• 6: Swap Scene ☞p.115
• 7: Capture Random Seed ☞p.116
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: Copy from Program ☞p.185
For more information, please see "Sequencer: Menu
Command" on page 271.
248
7–1–7: Scene Matrix
7–1
–6
Menu
7–1
–7a
7–1–7a: Module Control Scene Matrix
Here you can conveniently view and edit the selected Scenes
for each of the five Module Control layers at the same time.
There is a row for each Module, with the top row
corresponding to the Master setting. Each row has eight
buttons corresponding to the eight front panel KARMA
Scenes Switches 1/5–4/8. Therefore, you can select any
scene in any layer without changing the MODULE
CONTROL switch setting. The grid shows an overview of
which Scene is selected in any of the layers at any given
time.
M
A
B
C
D
[Off, 00...95]
[000...127]
Link Scenes (Link Scenes To Master):
A
B
C
D
Enable RTC (Enable RTC By Master):
A
B
C
D
DT Run (Drum Track Run) 1...8
For more information, please see "7–1–7: Scene Matrix" on
page 165.
7–1
–7
Menu
[1...8]
[1...8]
[1...8]
[1...8]
[1...8]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]

Advertisement

Table of Contents
loading

This manual is also suitable for:

M3-88M3-73M3-61M3-m

Table of Contents