Sampling P4: Controllers; 4-1: Setup - Korg M3 Parameter Manual

Sampling P4: Controllers

4–1: Setup
4–1a
4–1b
Here you can specify the SW1 and SW2 switch and 5–8
slider functions of the Sampling mode when Control Assign
REALTIME CONTROL is selected.
Note: SW1 and SW2 can be controlled by the KYBD-61/73/
88's SW1 and SW2 switches.
In Sampling mode, it is not possible to use AMS to
control program parameters.
4–1a: Panel Switch Assign
SW1 (SW1 Assign)
This assigns the function of SW1.For more information,
please see "List of SW 1/2 assignments" on page 597.
Mode (SW1 Mode)
This specifies the on/off operation when you press the
KYBD-61/73/88's SW1 switch.
Toggle: The state will alternate between On and Off each
time you press the SW1 switch.
Momentary: The state will remain On only while you
continue holding down the SW1 switch.
SW2 (SW2 Assign)
Mode (SW2 Mode)
This assigns the function of SW2. The functions that can be
assigned to SW2 are the same as for SW1, with the
substitution of SW2 Mod. (CC#81) instead of the SW1's SW1
Mod. (CC#80).
4–1
Menu
[Off, ..., After Touch Lock]
[Toggle, Momentary]
[Off, ..., After Touch Lock]
[Toggle, Momentary]
Sampling P4: Controllers 4–1: Setup
4–1b: Realtime Control Slider Assign
Here you can assign the functions (mainly types of control
change) that sliders 5–8 will have when Control Assign
REALTIME CONTROL is selected. (See "1–6b: Realtime
Control Slider Assign" on page 35)
The functions you assign here are active when you select
CONTROL ASSIGN REALTIME CONTROL and operate
sliders 5–8.
Slider 5
Slider 6
Slider 7
Slider 8
Example settings)
In this example, we'll use realtime modulation slider 5 to
control the "Wet/Dry" parameter of the 056: Stereo/Cross
Delay assigned to IFX1, and use slider 6 to control the post-
IFX "Pan." Then we'll sample an audio signal from an
external source while controlling these parameters in
realtime.
1. Set Bus Select (0–2a) to IFX1.
2. Select 056: Stereo/CrossDelay for "IFX1."
3. Set the IFX1 page "Wet/Dry" setting to Dry, "Src
(Source)" to Slider M5[+], and "Amt" to +50.
4. In the Realime Control Slider Assign area, assign
"Slider 5" to Slider Mod.5 (CC#17) and "Slider 6" to
Post IFX Pan (CC#08).
5. Rotate Sliders 5, 6 and the panning of the delay level
and the delay will change. You can sample the sound
while you modify it.
▼4–1: Menu Command
• 0: Panel–SW Solo Mode On ☞p.329
• 1: Exclusive Solo ☞p.329
• 2: Delete Sample ☞p.329
• 3: Copy Sample ☞p.330
• 4: Rename Sample ☞p.330
• 5: Move Sample ☞p.330
• 6: Sample Mono To Stereo (Change Sample
Type) ☞p.331
• 7: Delete MS (Delete Multisample) ☞p.331
• 8: Copy MS (Copy Multisample) ☞p.332
• 9: Rename MS (Rename Multisample) ☞p.332
• 10: Move MS (Move Multisample) ☞p.332
• 11: Convert MS To Program (Convert Multisample To
Program) ☞p.333
• 12: MS Mono To Stereo ☞p.333
• 12: MS Stereo To Mono ☞p.333
• 13: Optimize RAM ☞p.334
• 14: Select Directory ☞p.334
• 15: Keyboard Display ☞p.334
• 16: Auto Sampling Setup ☞p.334
For more information, please see "Sampling: Menu
Command" on page 329.
[Off, ..., MIDI CC#95]
[Off, ..., MIDI CC#95]
[Off, ..., MIDI CC#95]
[Off, ..., MIDI CC#95]
319