Seq Page Select - Korg M3 Parameter Manual

Sequencer mode

SEQ Page Select

• Press the MODE SEQ switch to select Sequencer mode.
You can use the following ways to select the pages in
Sequencer mode.
1. Press the SEQ switch, and then press the MENU switch
to access "Page Select."
"Page Select" shows an abbreviated name for each page.
The page in which you were prior to pressing the PAGE
SELECT switch is shown in light blue.
2. Select the desired page in the display.
Other ways to select pages
• Hold down the PAGE SELECT switch and press a
numeric keys 0–9 to specify a page number; you will
move to the corresponding page.
For example if you want to access the P3: Track Param
page, hold down the PAGE SELECT switch and press
numeric key 3.
Note: For pages that consist of multiple subpages, such as
P0–1, P0–2, P5–1 and P5–2, P7–1 through P7–4 or P8–1
and P8–2, the first of these pages (P0–1, P5–1, P7–1 or P8–
1) will be selected.
• You can press the EXIT switch to return to the P0: Play
page you selected most recently. Press the EXIT switch
once again to return to the Main page. Press the EXIT
switch to return to the P0: Play page.
194
Page
Song selection, playback, and recording.
(☞p.195)
Program selection for each track. (☞p.197)
Pan and volume settings etc. for each track.
P0–1: Play/REC (☞p.199)
Track playback loop settings. (☞p.200)
Audio input settings and resampling
settings. (☞p.201)
Recording method selection. (☞p.202)
P0–2: Play/REC Simple KARMA editing. (☞p.205)
Control Editing from the control surface. (☞p.208)
Drum track settings. (☞p.215)
X–Y control settings. (☞p.216)
P1: DT/XY/Ctrls SW1, 2, and slider function settings.
(☞p.221)
Pad note and velocity settings. (☞p.222)
EQ settings for each track. (☞p.224)
P2: EQ/Option Settings for the EXB-RADIAS option.
(☞p.225)
Various parameter settings for each track
P3: Track Param (MIDI channel, OSC selection, Pitch setting,
etc.) (☞p.226)
Key split and layer settings.
(Key zone and velocity zone) (☞p.231)
P4: Zone/Delay
Time delay from note-on to beginning of
sound. (☞p.233)
MIDI transmit/receive filter 1 settings.
P5–1: MIDI Filter1
(☞p.235)
MIDI transmit/receive filter 2 settings.
P5–2: MIDI Filter2
(☞p.239)
Step recording.
Event recording.
P6: Track Edit
Copy, delete, and other track editing.
(☞p.241)
P7–1: KARMA1
Overall KARMA settings. (☞p.243)
GE Setup
P7–2: KARMA2
Settings for each KARMA module. (☞p.250)
Module
P7–3: KARMA3 KARMA GE realtime parameter settings.
GE RTP (☞p.252)
P7–4: KARMA4 KARMA performance parameter settings.
Perf (☞p.254)
Oscillator output bus and master effect send
P8–1: IFX level settings. (☞p.257)
Routing1/1–5 Insert effect routing, selection, and settings.
(☞p.261)
P8–2: IFX Bus settings for oscillator output. (☞p.261)
Routing2 Common FX LFO 1, 2 settings (☞p.262)
Master effect routing, selection, and settings.
P9: MFX/TFX (☞p.263)
Total effect selection and settings. (☞p.264)
Pattern recording and editing. (☞p.265)
RPPR settings. (☞p.267)
P10: Pattern/RPPR
Converting a pattern to a drum track pattern.
(☞p.267)
Cue list settings.
P11: Cue List Consecutive playback of multiple songs.
Converting to a song. (☞p.269)
Main content