Isdn Bri Trunk Access - Nortel Meridian 1 Administration And Maintenance

Page 13 of 492
Chapter 1 — ISDN Basic Rate Interface

ISDN BRI trunk access

ISDN BRI trunk connections are configured on a per DSL basis, that is, DSL
trunk connections may be configured on any given DSL for any SILC or
UILC. The trunks can be accessed by both BRI and non-BRI terminals (such
as digital and 500/2500-type telephones).
ISDN BRI trunk access supports Local Exchange CO/DID connectivity,
ISDN BRI TIE trunk connectivity, and QSIG ISDN BRI trunk connectivity.
Local exchange CO/DID connectivity is accomplished through a MISP card
and an S/T interface, using the SILC line card. This connectivity is supported
for 1TR6, Numeris VN2, D70, EuroISDN, and Asia-Pacific protocols.
ISDN BRI TIE trunk connectivity is achieved through an MISP card and
either S/T or U interfaces, using the SILC and UILC line cards respectively.
For connectivity support, refer to Table 1.
connectivity is achieved through an MISP card and either S/T or U interfaces,
using the SILC and UILC line cards respectively. For connectivity support,
refer to Table 1.
Option 11C ISDN BRI Administration and Maintenance